Retrieve RAID 5 Partition

Redundant Array of Independent Disks, abbreviated as RAID is basically a data storage technology that merges several disk drive components on computer into a single logical unit in order to address the fault tolerance and performance limitations of disk storage. Beyond the limitations of single physical drive, it helps to improve the capacity and performance of logical drive. There are numerous drives in RAID where, the data is stored depending on the level of redundancy and performance using various “RAID” levels namely RAID 0, RAID 1, RAID 3, RAID 5 and RAID 10. Each level has its own policy for arrangement of files on the hard disk i.e. the level next better than the older levels. RAID levels greater than RAID 0 offers an error protection scheme called “parity” which is a widely used method providing fault tolerance in the given set of data.

Windows Download NowWindows Buy Now

Mac Download NowMac Buy Now

Now let’s talk about RAID 5 level. It is one of the admired level as, as it stripes both data and parity information across three or more hard drives and hence, all the disks carry both parity and information. It uses (Block – Level Data Stripping with distributed parity) technique. When a single drive failure occurs the array is not destroyed as, it calculates the subsequent reads from the distributed parity when drive failure occurs. As, it supports holding parity information, single drive failure results no loss of data. However, when a single drive failure occurs it, reduces the performance of RAID array until and unless the drive is replaced and the data associated with it is restored.

These days most of the individuals prefer RAID 5 partitions because if its improved performance. But, there are situations that lead to deletion or loss of data from RAID 5 partition. Now, don’t panic! Thinking how to getdataback RAID 5 partitions? As, you can now, recover RAID 5 partition data using powerful Hard Drive Recovery Software.  

Scenarios that lead to deletion or loss of data from RAID 5 partitions:

  • 1. You may accidentally delete important files from RAID 5 partition while dealing with unwanted one. But, don’t worry! you can even perform RAID 5 partition recovery process using reliable recovery software
  • 2. If you accidentally format hard drive then, it causes deletion of entire set of files and folders that were saved in RAID 5 hard drives. Hence, before formatting the hard drive it must be checked properly
  • 3. If there is a virus attack on your RAID drive then, there may be the possibility of losing files from it
  • 4. As a result of virus infection or sudden loss of power, the file system of RAID 5 hard drive can get corrupt when the drive is being accessed which, in turn results in deletion or loss of files from RAID 5 partition. Therefore, maintaining proper back up is better before using RAID 5 hard drive

You can perform RAID 5 partition retrieval process due to any of the situations mentioned above using Hard Drive Recovery Software. It is the most recommended software you can use to successfully retrieve RAID 5 partition data either deleted or lost from it on Windows OS. It has a simple graphical user interface and advanced list of options by using which even a novice user can perform partition recovery RAID 5 process effectively. It also helps you to recover formatted ExFAT partition where, In ExFAT partition the maximum size of a single partition is very large of about 64GB, which support storage of large files. It is compatible to retrieve RAID 5 partition data on computers/laptops installed with Windows 7, Windows 8, Windows XP, Windows Vista, Windows server 2003 and 2008 operating systems. It even supports to perform RAID 5 partition recovery process on all the latest versions of Mac operating systems. Hence, it is the best tool to perform RAID 5 partition recovery process.

This software even helps you to recover corrupted hard drive partition, desktop hard drives, portable hard disks, USB drives, memory cards, iPods and many others on your Windows computer. Now, all that you need to do is use the demo version of the software and try or greater chances of your deleted or lost data getting recovered from RAID 5 partition. Know more about how to perform RAID 5 partition recovery process through the following steps.

Windows Download NowWindows Buy Now

Mac Download NowMac Buy Now

Steps to perform RAID 5 partition recovery processes using Hard Drive Recovery Software:  

Step 1: Download and install the demo version of the software. Connect RAID 5 drives to the computer as external storage drive from where you want to recover files and Run the software. From the main screen select “Recover Drives” option and then, from the next screen select any of the options among “Partition Recovery” and “Formatted / Reformatted Recovery” options based on your requirement to recover RAID 5 partition data.

Retrieve RAID 5 Partition - Select Recover Drive Option

Figure 1: Main Screen

Step2: Now, the software scans and displays a list of logical drives choose the particular RAID 5 drive from where data needs to be recovered and click on “Next” button.

Retrieve RAID 5 Partition - Select Logical Drive

Figure 2: Select Logical Drive

Step 3: Once the scanning process is completed, you can view the recovered files using “Preview” option and then “Save” the recovered files to your desired location on computer.

Retrieve RAID 5 Partition - Save Recovered Files

Figure 3: Save Screen

Windows Download NowWindows Buy Now

Mac Download NowMac Buy Now

For Leopard (10.5) and
Snow Leopard (10.6) Users

Mac Download Now

For Lion (10.7) and
Mountain Lion (10.8) Users

Mac Download Now